You can flash a tuner using a USB drive or COM port — the entire process takes just 5-15 minutes. The key is getting the exact firmware version for your hardware revision and backing up your current firmware before making any changes.
Instruction
Eutelsat 9B at 9.0°E is confidently caught by an antenna from 80 cm. We explain how to mount a multifeed, set the azimuth and enter the channels in the receiver.
Instruction
The Openbox S3 Mini (SP3601 chipset) can be recovered via RS-232 even from a complete "brick" — flashing takes 15-45 minutes at a speed of 115200 baud.
Instruction
Tuner does not turn on after an update? In 60% of cases this is a soft failure — it can realistically be fixed on your own in 10-20 minutes, even without a soldering iron in hand.
This section gathers practical instructions for owners of satellite receivers and T2 tuners. We explain complex concepts in simple terms: how to aim an antenna at the correct satellite, assemble a multifeed setup to receive signals from multiple positions, adjust azimuth and elevation angles, and configure transponders and channels on your receiver.
A dedicated section covers recovering "bricked" tuners. If your device fails to turn on after an unsuccessful update, the issue is usually software-related and can often be fixed independently in just 10–20 minutes. Our guides cover firmware flashing via RS-232 and COM ports, hard resets, soft resets, and other recovery methods for various chipsets.
These instructions are suitable for everyone—from beginners who have just purchased a tuner to experienced users who maintain their own equipment. Each guide includes a list of required tools, step-by-step procedures, and common pitfalls to avoid. We regularly update this section with new guides on configuring satellites like Astra, Hotbird, Amos, and Eutelsat, as well as setting up IPTV.
Subscribe to our Telegram channel so you don't miss the latest instructions and tips for setting up digital TV.
