BH
Channel BH Frequency on Satellite (Broadcast Parameters 2026)
Videoguard, Conax SDUp-to-date satellite broadcasting parameters of BH in 2026: transponder frequency, polarization, and receiver tuning setup.
Broadcast Frequency
11977 MHz
Ku-діапазон
Polarization
H (Horizontal)
18 Volt
Symbol Rate (SR) / FEC
30000 kS/s
FEC: 3/4
Standard & Modulation
DVB-S / QPSK
MPEG-2
Latest TV channel broadcast parameters in 2026
The TV channel BH broadcasts via the geostationary satellite Eutelsat 9B (9.0° E) on transponder 11977 MHz with horizontal polarization (H). The digital symbol rate is 30000 kS/s, FEC error correction - 3/4. Broadcasting is provided in DVB-S / QPSK standard with MPEG-2 video compression and SD quality. Signal access is encrypted (Videoguard, Conax), available via pay-TV subscription.
Broadcast parameters of BH
Transponder frequency and reception parameters (2026)
Satellite & Orbit
Eutelsat 9B
(9.0° E)
Frequency & Polarization
11977 H
(Horizontal)
Symbol Rate (SR) / FEC
30000
•
FEC 3/4
Standard & Modulation
DVB-S / QPSK
Compression & Video Quality
MPEG-2
• SD
Access / Encryption
Videoguard, Conax
Provider / Package
Magenta TV Sat
Audio Language
English
Transmission Mode
Digital
Update Date
20.10.2026
Tuning formula for receiver:
11977 H 30000 3/4 DVB-S
Stream PID Codes
For manual PID scanning
Service ID
508
Video PID
1581
Audio PID
1582eng
PCR PID
1581
PMT PID
508
Audio Language
eng
How to tune channel BH on satellite receiver
Step-by-step manual frequency search guide in 2026
1
Open dish antenna setup menu:
On the remote control, press MENU and select «Installation» or «Channel Search».
2
Select satellite:
Select Eutelsat 9B (9.0° E). Ensure signal quality and strength are above 60%.
3
Enter transponder frequency parameters:
ТП: 11977 MHz
|
Пол: H (Horizontal)
|
Швидкість: 30000
|
FEC: 3/4
4
Start scan and save:
Press search button (usually OK or color button). Newly found channel will appear at the end of channel list.
Frequently Asked Questions
Signal is encrypted. A smartcard or provider subscription is required for reception.
A DVB-S compatible receiver supporting MPEG-4 (H.264 / HEVC) is required. Older first-generation DVB-S/MPEG-2 receivers cannot receive the signal.
Check symbol rate (30000), dish alignment towards satellite Eutelsat 9B (9.0° E), and cable connections.
Currently the primary signal is FTA. During selective live sport events requiring rights protection, signal may be BISS encrypted - valid key is available on this page.