ML
Channel Mezzo Live HD Frequency on Satellite (Broadcast Parameters 2026)
Videoguard HDUp-to-date satellite broadcasting parameters of Mezzo Live HD in 2026: transponder frequency, polarization, and receiver tuning setup.
Broadcast Frequency
11843 MHz
Ku-діапазон
Polarization
V (Vertical)
13 Volt
Symbol Rate (SR) / FEC
27500 kS/s
FEC: 3/5
Standard & Modulation
DVB-S2 / 8PSK
MPEG-4
Latest TV channel broadcast parameters in 2026
The TV channel Mezzo Live HD broadcasts via the geostationary satellite Eutelsat 9B (9.0° E) on transponder 11843 MHz with vertical polarization (V). The digital symbol rate is 27500 kS/s, FEC error correction - 3/5. Broadcasting is provided in DVB-S2 / 8PSK standard with MPEG-4 video compression and HD quality. Signal access is encrypted (Videoguard), available via pay-TV subscription.
Broadcast parameters of Mezzo Live HD
Transponder frequency and reception parameters (2026)
Satellite & Orbit
Eutelsat 9B
(9.0° E)
Frequency & Polarization
11843 V
(Vertical)
Symbol Rate (SR) / FEC
27500
•
FEC 3/5
Standard & Modulation
DVB-S2 / 8PSK
Compression & Video Quality
MPEG-4
• HD
Access / Encryption
Videoguard
Provider / Package
Cosmote TV
Audio Language
French
Transmission Mode
Digital
Update Date
20.10.2026
Tuning formula for receiver:
11843 V 27500 3/5 DVB-S2
Stream PID Codes
For manual PID scanning
Service ID
1097
Video PID
497
Audio PID
597fre
PCR PID
497
PMT PID
1097
Audio Language
fre
How to tune channel Mezzo Live HD on satellite receiver
Step-by-step manual frequency search guide in 2026
1
Open dish antenna setup menu:
On the remote control, press MENU and select «Installation» or «Channel Search».
2
Select satellite:
Select Eutelsat 9B (9.0° E). Ensure signal quality and strength are above 60%.
3
Enter transponder frequency parameters:
ТП: 11843 MHz
|
Пол: V (Vertical)
|
Швидкість: 27500
|
FEC: 3/5
4
Start scan and save:
Press search button (usually OK or color button). Newly found channel will appear at the end of channel list.
Frequently Asked Questions
Signal is encrypted. A smartcard or provider subscription is required for reception.
A DVB-S2 compatible receiver supporting MPEG-4 (H.264 / HEVC) is required. Older first-generation DVB-S/MPEG-2 receivers cannot receive the signal.
Check symbol rate (27500), dish alignment towards satellite Eutelsat 9B (9.0° E), and cable connections.
Currently the primary signal is FTA. During selective live sport events requiring rights protection, signal may be BISS encrypted - valid key is available on this page.