T5
Channel Tele 5 Frequency on Satellite (Broadcast Parameters 2026)
Panaccess SDUp-to-date satellite broadcasting parameters of Tele 5 in 2026: transponder frequency, polarization, and receiver tuning setup.
Broadcast Frequency
12565 MHz
Ku-діапазон
Polarization
V (Vertical)
13 Volt
Symbol Rate (SR) / FEC
30000 kS/s
FEC: 5/6
Standard & Modulation
DVB-S2 / QPSK
MPEG-4
Latest TV channel broadcast parameters in 2026
The TV channel Tele 5 broadcasts via the geostationary satellite Astra 4A (5.0° E) on transponder 12565 MHz with vertical polarization (V). The digital symbol rate is 30000 kS/s, FEC error correction - 5/6. Broadcasting is provided in DVB-S2 / QPSK standard with MPEG-4 video compression and SD quality. Signal access is encrypted (Panaccess), available via pay-TV subscription.
Broadcast parameters of Tele 5
Transponder frequency and reception parameters (2026)
Satellite & Orbit
Astra 4A
(5.0° E)
Frequency & Polarization
12565 V
(Vertical)
Symbol Rate (SR) / FEC
30000
•
FEC 5/6
Standard & Modulation
DVB-S2 / QPSK
Compression & Video Quality
MPEG-4
• SD
Access / Encryption
Panaccess
Provider / Package
Satelio
Audio Language
German
Transmission Mode
Digital
Update Date
25.10.2026
Tuning formula for receiver:
12565 V 30000 5/6 DVB-S2
Stream PID Codes
For manual PID scanning
Service ID
40600
Video PID
6001
Audio PID
6002ger
PCR PID
6001
PMT PID
40600
Audio Language
ger
How to tune channel Tele 5 on satellite receiver
Step-by-step manual frequency search guide in 2026
1
Open dish antenna setup menu:
On the remote control, press MENU and select «Installation» or «Channel Search».
2
Select satellite:
Select Astra 4A (5.0° E). Ensure signal quality and strength are above 60%.
3
Enter transponder frequency parameters:
ТП: 12565 MHz
|
Пол: V (Vertical)
|
Швидкість: 30000
|
FEC: 5/6
4
Start scan and save:
Press search button (usually OK or color button). Newly found channel will appear at the end of channel list.
Frequently Asked Questions
Signal is encrypted. A smartcard or provider subscription is required for reception.
A DVB-S2 compatible receiver supporting MPEG-4 (H.264 / HEVC) is required. Older first-generation DVB-S/MPEG-2 receivers cannot receive the signal.
Check symbol rate (30000), dish alignment towards satellite Astra 4A (5.0° E), and cable connections.
Currently the primary signal is FTA. During selective live sport events requiring rights protection, signal may be BISS encrypted - valid key is available on this page.