ML
Channel Mezzo Live Frequency on Satellite (Broadcast Parameters 2026)
Panaccess SDUp-to-date satellite broadcasting parameters of Mezzo Live in 2026: transponder frequency, polarization, and receiver tuning setup.
Broadcast Frequency
12565 MHz
Ku-діапазон
Polarization
V (Vertical)
13 Volt
Symbol Rate (SR) / FEC
30000 kS/s
FEC: 5/6
Standard & Modulation
DVB-S2 / QPSK
MPEG-4
Latest TV channel broadcast parameters in 2026
The TV channel Mezzo Live broadcasts via the geostationary satellite Astra 4A (5.0° E) on transponder 12565 MHz with vertical polarization (V). The digital symbol rate is 30000 kS/s, FEC error correction - 5/6. Broadcasting is provided in DVB-S2 / QPSK standard with MPEG-4 video compression and SD quality. Signal access is encrypted (Panaccess), available via pay-TV subscription.
Broadcast parameters of Mezzo Live
Transponder frequency and reception parameters (2026)
Satellite & Orbit
Astra 4A
(5.0° E)
Frequency & Polarization
12565 V
(Vertical)
Symbol Rate (SR) / FEC
30000
•
FEC 5/6
Standard & Modulation
DVB-S2 / QPSK
Compression & Video Quality
MPEG-4
• SD
Access / Encryption
Panaccess
Provider / Package
Satelio
Audio Language
French
Transmission Mode
Digital
Update Date
25.10.2026
Tuning formula for receiver:
12565 V 30000 5/6 DVB-S2
Stream PID Codes
For manual PID scanning
Service ID
40160
Video PID
1601
Audio PID
1602fre
PCR PID
1601
PMT PID
40160
Audio Language
fre
How to tune channel Mezzo Live on satellite receiver
Step-by-step manual frequency search guide in 2026
1
Open dish antenna setup menu:
On the remote control, press MENU and select «Installation» or «Channel Search».
2
Select satellite:
Select Astra 4A (5.0° E). Ensure signal quality and strength are above 60%.
3
Enter transponder frequency parameters:
ТП: 12565 MHz
|
Пол: V (Vertical)
|
Швидкість: 30000
|
FEC: 5/6
4
Start scan and save:
Press search button (usually OK or color button). Newly found channel will appear at the end of channel list.
Frequently Asked Questions
Signal is encrypted. A smartcard or provider subscription is required for reception.
A DVB-S2 compatible receiver supporting MPEG-4 (H.264 / HEVC) is required. Older first-generation DVB-S/MPEG-2 receivers cannot receive the signal.
Check symbol rate (30000), dish alignment towards satellite Astra 4A (5.0° E), and cable connections.
Currently the primary signal is FTA. During selective live sport events requiring rights protection, signal may be BISS encrypted - valid key is available on this page.