W2
Channel wPolsce 24 Frequency on Satellite (Broadcast Parameters 2026)
Conax, Irdeto, Nagravision SDUp-to-date satellite broadcasting parameters of wPolsce 24 in 2026: transponder frequency, polarization, and receiver tuning setup.
Broadcast Frequency
10758 MHz
Ku-діапазон
Polarization
V (Vertical)
13 Volt
Symbol Rate (SR) / FEC
27500 kS/s
FEC: 3/4
Standard & Modulation
DVB-S2 / 8PSK
MPEG-4
Latest TV channel broadcast parameters in 2026
The TV channel wPolsce 24 broadcasts via the geostationary satellite Eutelsat Hot Bird 13G (13.0° E) on transponder 10758 MHz with vertical polarization (V). The digital symbol rate is 27500 kS/s, FEC error correction - 3/4. Broadcasting is provided in DVB-S2 / 8PSK standard with MPEG-4 video compression and SD quality. Signal access is encrypted (Conax, Irdeto, Nagravision), available via pay-TV subscription.
Broadcast parameters of wPolsce 24
Transponder frequency and reception parameters (2026)
Satellite & Orbit
Eutelsat Hot Bird 13G
(13.0° E)
Frequency & Polarization
10758 V
(Vertical)
Symbol Rate (SR) / FEC
27500
•
FEC 3/4
Standard & Modulation
DVB-S2 / 8PSK
Compression & Video Quality
MPEG-4
• SD
Access / Encryption
Conax, Irdeto, Nagravision
Provider / Package
Polsat Box
Audio Language
Polish
Transmission Mode
Digital
Update Date
20.10.2026
Tuning formula for receiver:
10758 V 27500 3/4 DVB-S2
Stream PID Codes
For manual PID scanning
Service ID
17017
Video PID
279
Audio PID
535pol
PCR PID
279
PMT PID
17017
Audio Language
pol
How to tune channel wPolsce 24 on satellite receiver
Step-by-step manual frequency search guide in 2026
1
Open dish antenna setup menu:
On the remote control, press MENU and select «Installation» or «Channel Search».
2
Select satellite:
Select Eutelsat Hot Bird 13G (13.0° E). Ensure signal quality and strength are above 60%.
3
Enter transponder frequency parameters:
ТП: 10758 MHz
|
Пол: V (Vertical)
|
Швидкість: 27500
|
FEC: 3/4
4
Start scan and save:
Press search button (usually OK or color button). Newly found channel will appear at the end of channel list.
Frequently Asked Questions
Signal is encrypted. A smartcard or provider subscription is required for reception.
A DVB-S2 compatible receiver supporting MPEG-4 (H.264 / HEVC) is required. Older first-generation DVB-S/MPEG-2 receivers cannot receive the signal.
Check symbol rate (27500), dish alignment towards satellite Eutelsat Hot Bird 13G (13.0° E), and cable connections.
Currently the primary signal is FTA. During selective live sport events requiring rights protection, signal may be BISS encrypted - valid key is available on this page.