P2
Channel Puls 2 Frequency on Satellite (Broadcast Parameters 2026)
Conax, Irdeto, Mediaguard, Nagravision, Viaccess SDUp-to-date satellite broadcasting parameters of Puls 2 in 2026: transponder frequency, polarization, and receiver tuning setup.
Broadcast Frequency
10796 MHz
Ku-діапазон
Polarization
V (Vertical)
13 Volt
Symbol Rate (SR) / FEC
27500 kS/s
FEC: 3/4
Standard & Modulation
DVB-S2 / 8PSK
MPEG-4
Latest TV channel broadcast parameters in 2026
The TV channel Puls 2 broadcasts via the geostationary satellite Eutelsat Hot Bird 13G (13.0° E) on transponder 10796 MHz with vertical polarization (V). The digital symbol rate is 27500 kS/s, FEC error correction - 3/4. Broadcasting is provided in DVB-S2 / 8PSK standard with MPEG-4 video compression and SD quality. Signal access is encrypted (Conax, Irdeto, Mediaguard, Nagravision, Viaccess), available via pay-TV subscription.
Broadcast parameters of Puls 2
Transponder frequency and reception parameters (2026)
Satellite & Orbit
Eutelsat Hot Bird 13G
(13.0° E)
Frequency & Polarization
10796 V
(Vertical)
Symbol Rate (SR) / FEC
27500
•
FEC 3/4
Standard & Modulation
DVB-S2 / 8PSK
Compression & Video Quality
MPEG-4
• SD
Access / Encryption
Conax, Irdeto, Mediaguard, Nagravision, Viaccess
Provider / Package
Platforma Canal+
Audio Language
Polish
Transmission Mode
Digital
Update Date
20.10.2026
Tuning formula for receiver:
10796 V 27500 3/4 DVB-S2
Stream PID Codes
For manual PID scanning
Service ID
15710
Video PID
169
Audio PID
116pol,117000
PCR PID
169
PMT PID
15710
Audio Language
pol
How to tune channel Puls 2 on satellite receiver
Step-by-step manual frequency search guide in 2026
1
Open dish antenna setup menu:
On the remote control, press MENU and select «Installation» or «Channel Search».
2
Select satellite:
Select Eutelsat Hot Bird 13G (13.0° E). Ensure signal quality and strength are above 60%.
3
Enter transponder frequency parameters:
ТП: 10796 MHz
|
Пол: V (Vertical)
|
Швидкість: 27500
|
FEC: 3/4
4
Start scan and save:
Press search button (usually OK or color button). Newly found channel will appear at the end of channel list.
Frequently Asked Questions
Signal is encrypted. A smartcard or provider subscription is required for reception.
A DVB-S2 compatible receiver supporting MPEG-4 (H.264 / HEVC) is required. Older first-generation DVB-S/MPEG-2 receivers cannot receive the signal.
Check symbol rate (27500), dish alignment towards satellite Eutelsat Hot Bird 13G (13.0° E), and cable connections.
Currently the primary signal is FTA. During selective live sport events requiring rights protection, signal may be BISS encrypted - valid key is available on this page.