6TE
Channel 6ter Frequency on Satellite (Broadcast Parameters 2026)
Viaccess SDUp-to-date satellite broadcasting parameters of 6ter in 2026: transponder frequency, polarization, and receiver tuning setup.
Broadcast Frequency
10892 MHz
Ku-діапазон
Polarization
H (Horizontal)
18 Volt
Symbol Rate (SR) / FEC
27500 kS/s
FEC: 3/4
Standard & Modulation
DVB-S2 / 8PSK
MPEG-4
Latest TV channel broadcast parameters in 2026
The TV channel 6ter broadcasts via the geostationary satellite Eutelsat Hot Bird 13G (13.0° E) on transponder 10892 MHz with horizontal polarization (H). The digital symbol rate is 27500 kS/s, FEC error correction - 3/4. Broadcasting is provided in DVB-S2 / 8PSK standard with MPEG-4 video compression and SD quality. Signal access is encrypted (Viaccess), available via pay-TV subscription.
Broadcast parameters of 6ter
Transponder frequency and reception parameters (2026)
Satellite & Orbit
Eutelsat Hot Bird 13G
(13.0° E)
Frequency & Polarization
10892 H
(Horizontal)
Symbol Rate (SR) / FEC
27500
•
FEC 3/4
Standard & Modulation
DVB-S2 / 8PSK
Compression & Video Quality
MPEG-4
• SD
Access / Encryption
Viaccess
Provider / Package
Bis
Audio Language
French
Transmission Mode
Digital
Update Date
20.10.2026
Tuning formula for receiver:
10892 H 27500 3/4 DVB-S2
Stream PID Codes
For manual PID scanning
Service ID
322
Video PID
691
Audio PID
692fre
PCR PID
691
PMT PID
322
Audio Language
fre
How to tune channel 6ter on satellite receiver
Step-by-step manual frequency search guide in 2026
1
Open dish antenna setup menu:
On the remote control, press MENU and select «Installation» or «Channel Search».
2
Select satellite:
Select Eutelsat Hot Bird 13G (13.0° E). Ensure signal quality and strength are above 60%.
3
Enter transponder frequency parameters:
ТП: 10892 MHz
|
Пол: H (Horizontal)
|
Швидкість: 27500
|
FEC: 3/4
4
Start scan and save:
Press search button (usually OK or color button). Newly found channel will appear at the end of channel list.
Frequently Asked Questions
Signal is encrypted. A smartcard or provider subscription is required for reception.
A DVB-S2 compatible receiver supporting MPEG-4 (H.264 / HEVC) is required. Older first-generation DVB-S/MPEG-2 receivers cannot receive the signal.
Check symbol rate (27500), dish alignment towards satellite Eutelsat Hot Bird 13G (13.0° E), and cable connections.
Currently the primary signal is FTA. During selective live sport events requiring rights protection, signal may be BISS encrypted - valid key is available on this page.