WT
Channel Warner TV Czech Frequency on Satellite (Broadcast Parameters 2026)
Viaccess HDUp-to-date satellite broadcasting parameters of Warner TV Czech in 2026: transponder frequency, polarization, and receiver tuning setup.
Broadcast Frequency
11919 MHz
Ku-діапазон
Polarization
V (Vertical)
13 Volt
Symbol Rate (SR) / FEC
30000 kS/s
FEC: 3/4
Standard & Modulation
DVB-S2 / 8PSK
MPEG-4
Latest TV channel broadcast parameters in 2026
The TV channel Warner TV Czech broadcasts via the geostationary satellite Eutelsat 9B (9.0° E) on transponder 11919 MHz with vertical polarization (V). The digital symbol rate is 30000 kS/s, FEC error correction - 3/4. Broadcasting is provided in DVB-S2 / 8PSK standard with MPEG-4 video compression and HD quality. Signal access is encrypted (Viaccess), available via pay-TV subscription.
Broadcast parameters of Warner TV Czech
Transponder frequency and reception parameters (2026)
Satellite & Orbit
Eutelsat 9B
(9.0° E)
Frequency & Polarization
11919 V
(Vertical)
Symbol Rate (SR) / FEC
30000
•
FEC 3/4
Standard & Modulation
DVB-S2 / 8PSK
Compression & Video Quality
MPEG-4
• HD
Access / Encryption
Viaccess
Provider / Package
Discovery Networks
Audio Language
Czech
Transmission Mode
Digital
Update Date
20.10.2026
Tuning formula for receiver:
11919 V 30000 3/4 DVB-S2
Stream PID Codes
For manual PID scanning
Service ID
6700
Video PID
6700
Audio PID
6721cze,6722eng,6723cze
PCR PID
6700
PMT PID
6700
Audio Language
cze
How to tune channel Warner TV Czech on satellite receiver
Step-by-step manual frequency search guide in 2026
1
Open dish antenna setup menu:
On the remote control, press MENU and select «Installation» or «Channel Search».
2
Select satellite:
Select Eutelsat 9B (9.0° E). Ensure signal quality and strength are above 60%.
3
Enter transponder frequency parameters:
ТП: 11919 MHz
|
Пол: V (Vertical)
|
Швидкість: 30000
|
FEC: 3/4
4
Start scan and save:
Press search button (usually OK or color button). Newly found channel will appear at the end of channel list.
Frequently Asked Questions
Signal is encrypted. A smartcard or provider subscription is required for reception.
A DVB-S2 compatible receiver supporting MPEG-4 (H.264 / HEVC) is required. Older first-generation DVB-S/MPEG-2 receivers cannot receive the signal.
Check symbol rate (30000), dish alignment towards satellite Eutelsat 9B (9.0° E), and cable connections.
Currently the primary signal is FTA. During selective live sport events requiring rights protection, signal may be BISS encrypted - valid key is available on this page.