ST
Channel Sisal TV 5 Frequency on Satellite (Broadcast Parameters 2026)
Xcrypt SDUp-to-date satellite broadcasting parameters of Sisal TV 5 in 2026: transponder frequency, polarization, and receiver tuning setup.
Broadcast Frequency
11823 MHz
Ku-діапазон
Polarization
H (Horizontal)
18 Volt
Symbol Rate (SR) / FEC
27500 kS/s
FEC: 3/4
Standard & Modulation
DVB-S / QPSK
MPEG-4 AVC (H.264)
Latest TV channel broadcast parameters in 2026
The TV channel Sisal TV 5 broadcasts via the geostationary satellite Eutelsat 9B (9.0° E) on transponder 11823 MHz with horizontal polarization (H). The digital symbol rate is 27500 kS/s, FEC error correction - 3/4. Broadcasting is provided in DVB-S / QPSK standard with MPEG-4 AVC (H.264) video compression and SD quality. Signal access is encrypted (Xcrypt), available via pay-TV subscription.
Broadcast parameters of Sisal TV 5
Transponder frequency and reception parameters (2026)
Satellite & Orbit
Eutelsat 9B
(9.0° E)
Frequency & Polarization
11823 H
(Horizontal)
Symbol Rate (SR) / FEC
27500
•
FEC 3/4
Standard & Modulation
DVB-S / QPSK
Compression & Video Quality
MPEG-4 AVC (H.264)
• SD
Access / Encryption
Xcrypt
Provider / Package
Skylogic
Audio Language
Italian
Transmission Mode
Digital
Update Date
25.10.2026
Tuning formula for receiver:
11823 H 27500 3/4 DVB-S
Stream PID Codes
For manual PID scanning
Service ID
1850
Video PID
1851
Audio PID
1852ita
PCR PID
1851
PMT PID
1850
Audio Language
ita
How to tune channel Sisal TV 5 on satellite receiver
Step-by-step manual frequency search guide in 2026
1
Open dish antenna setup menu:
On the remote control, press MENU and select «Installation» or «Channel Search».
2
Select satellite:
Select Eutelsat 9B (9.0° E). Ensure signal quality and strength are above 60%.
3
Enter transponder frequency parameters:
ТП: 11823 MHz
|
Пол: H (Horizontal)
|
Швидкість: 27500
|
FEC: 3/4
4
Start scan and save:
Press search button (usually OK or color button). Newly found channel will appear at the end of channel list.
Frequently Asked Questions
Signal is encrypted. A smartcard or provider subscription is required for reception.
A DVB-S compatible receiver supporting MPEG-4 (H.264 / HEVC) is required. Older first-generation DVB-S/MPEG-2 receivers cannot receive the signal.
Check symbol rate (27500), dish alignment towards satellite Eutelsat 9B (9.0° E), and cable connections.
Currently the primary signal is FTA. During selective live sport events requiring rights protection, signal may be BISS encrypted - valid key is available on this page.