NC
Channel Nexum Channel Frequency on Satellite (Broadcast Parameters 2026)
Videoguard, Nagravision SDUp-to-date satellite broadcasting parameters of Nexum Channel in 2026: transponder frequency, polarization, and receiver tuning setup.
Broadcast Frequency
12111 MHz
Ku-діапазон
Polarization
V (Vertical)
13 Volt
Symbol Rate (SR) / FEC
31400 kS/s
FEC: 2/3
Standard & Modulation
DVB-S2 / 16APSK
MPEG-4
Latest TV channel broadcast parameters in 2026
The TV channel Nexum Channel broadcasts via the geostationary satellite Eutelsat 9B (9.0° E) on transponder 12111 MHz with vertical polarization (V). The digital symbol rate is 31400 kS/s, FEC error correction - 2/3. Broadcasting is provided in DVB-S2 / 16APSK standard with MPEG-4 video compression and SD quality. Signal access is encrypted (Videoguard, Nagravision), available via pay-TV subscription.
Broadcast parameters of Nexum Channel
Transponder frequency and reception parameters (2026)
Satellite & Orbit
Eutelsat 9B
(9.0° E)
Frequency & Polarization
12111 V
(Vertical)
Symbol Rate (SR) / FEC
31400
•
FEC 2/3
Standard & Modulation
DVB-S2 / 16APSK
Compression & Video Quality
MPEG-4
• SD
Access / Encryption
Videoguard, Nagravision
Provider / Package
Eutelsat 9B
Audio Language
Italian
Transmission Mode
Digital
Update Date
20.10.2026
Tuning formula for receiver:
12111 V 31400 2/3 DVB-S2
Stream PID Codes
For manual PID scanning
Service ID
7206
Video PID
1220
Audio PID
1221ita
PCR PID
1220
PMT PID
7206
Audio Language
ita
How to tune channel Nexum Channel on satellite receiver
Step-by-step manual frequency search guide in 2026
1
Open dish antenna setup menu:
On the remote control, press MENU and select «Installation» or «Channel Search».
2
Select satellite:
Select Eutelsat 9B (9.0° E). Ensure signal quality and strength are above 60%.
3
Enter transponder frequency parameters:
ТП: 12111 MHz
|
Пол: V (Vertical)
|
Швидкість: 31400
|
FEC: 2/3
4
Start scan and save:
Press search button (usually OK or color button). Newly found channel will appear at the end of channel list.
Frequently Asked Questions
Signal is encrypted. A smartcard or provider subscription is required for reception.
A DVB-S2 compatible receiver supporting MPEG-4 (H.264 / HEVC) is required. Older first-generation DVB-S/MPEG-2 receivers cannot receive the signal.
Check symbol rate (31400), dish alignment towards satellite Eutelsat 9B (9.0° E), and cable connections.
Currently the primary signal is FTA. During selective live sport events requiring rights protection, signal may be BISS encrypted - valid key is available on this page.