EBS
Channel EbS+ Frequency on Satellite (Broadcast Parameters 2026)
FTA (Free-to-Air) HDUp-to-date satellite broadcasting parameters of EbS+ in 2026: transponder frequency, polarization, and receiver tuning setup.
Broadcast Frequency
11900 MHz
Ku-діапазон
Polarization
H (Horizontal)
18 Volt
Symbol Rate (SR) / FEC
27500 kS/s
FEC: 2/3
Standard & Modulation
DVB-S2 / 8PSK
MPEG-4
Latest TV channel broadcast parameters in 2026
The TV channel EbS+ broadcasts via the geostationary satellite Eutelsat 9B (9.0° E) on transponder 11900 MHz with horizontal polarization (H). The digital symbol rate is 27500 kS/s, FEC error correction - 2/3. Broadcasting is provided in DVB-S2 / 8PSK standard with MPEG-4 video compression and HD quality. Signal access is Free-to-Air (FTA), no subscription or smartcard required.
Broadcast parameters of EbS+
Transponder frequency and reception parameters (2026)
Satellite & Orbit
Eutelsat 9B
(9.0° E)
Frequency & Polarization
11900 H
(Horizontal)
Symbol Rate (SR) / FEC
27500
•
FEC 2/3
Standard & Modulation
DVB-S2 / 8PSK
Compression & Video Quality
MPEG-4
• HD
Access / Encryption
FTA (Free-to-Air)
Provider / Package
Eutelsat 9B
Audio Language
Original
Resolution
1920 × 1080
Transmission Mode
Digital
Update Date
20.10.2026
Tuning formula for receiver:
11900 H 27500 2/3 DVB-S2
Stream PID Codes
For manual PID scanning
Service ID
433
Video PID
400
Audio PID
401000,402eng,403fre,404ger,405ita,406spa,407gre,408por,409dut,410dan,411fin,412swe,413cze,414est,415lav,416lit,417hun,418mlt,419pol,420slo,421slv,422bul,423rum,424gle,425hrv
PCR PID
400
PMT PID
433
Audio Language
000
How to tune channel EbS+ on satellite receiver
Step-by-step manual frequency search guide in 2026
1
Open dish antenna setup menu:
On the remote control, press MENU and select «Installation» or «Channel Search».
2
Select satellite:
Select Eutelsat 9B (9.0° E). Ensure signal quality and strength are above 60%.
3
Enter transponder frequency parameters:
ТП: 11900 MHz
|
Пол: H (Horizontal)
|
Швидкість: 27500
|
FEC: 2/3
4
Start scan and save:
Press search button (usually OK or color button). Newly found channel will appear at the end of channel list.
Frequently Asked Questions
Yes, broadcasting is free-to-air (FTA). No paid subscription or Internet needed - just a DVB-S2 receiver and aligned satellite dish.
A DVB-S2 compatible receiver supporting MPEG-4 (H.264 / HEVC) is required. Older first-generation DVB-S/MPEG-2 receivers cannot receive the signal.
Check symbol rate (27500), dish alignment towards satellite Eutelsat 9B (9.0° E), and cable connections.
Currently the primary signal is FTA. During selective live sport events requiring rights protection, signal may be BISS encrypted - valid key is available on this page.