78
Channel 70-80 TV Frequency on Satellite (Broadcast Parameters 2026)
FTA (Free-to-Air) SDUp-to-date satellite broadcasting parameters of 70-80 TV in 2026: transponder frequency, polarization, and receiver tuning setup.
Broadcast Frequency
12226 MHz
Ku-діапазон
Polarization
V (Vertical)
13 Volt
Symbol Rate (SR) / FEC
31400 kS/s
FEC: 2/3
Standard & Modulation
DVB-S2 / 16APSK
MPEG-4
Latest TV channel broadcast parameters in 2026
The TV channel 70-80 TV broadcasts via the geostationary satellite Eutelsat 9B (9.0° E) on transponder 12226 MHz with vertical polarization (V). The digital symbol rate is 31400 kS/s, FEC error correction - 2/3. Broadcasting is provided in DVB-S2 / 16APSK standard with MPEG-4 video compression and SD quality. Signal access is Free-to-Air (FTA), no subscription or smartcard required.
Broadcast parameters of 70-80 TV
Transponder frequency and reception parameters (2026)
Satellite & Orbit
Eutelsat 9B
(9.0° E)
Frequency & Polarization
12226 V
(Vertical)
Symbol Rate (SR) / FEC
31400
•
FEC 2/3
Standard & Modulation
DVB-S2 / 16APSK
Compression & Video Quality
MPEG-4
• SD
Access / Encryption
FTA (Free-to-Air)
Provider / Package
EI Towers
Audio Language
Italian
Transmission Mode
Digital
Update Date
20.10.2026
Tuning formula for receiver:
12226 V 31400 2/3 DVB-S2
Stream PID Codes
For manual PID scanning
Service ID
2009
Video PID
1780
Audio PID
ita
PCR PID
1780
PMT PID
2009
Audio Language
ita
How to tune channel 70-80 TV on satellite receiver
Step-by-step manual frequency search guide in 2026
1
Open dish antenna setup menu:
On the remote control, press MENU and select «Installation» or «Channel Search».
2
Select satellite:
Select Eutelsat 9B (9.0° E). Ensure signal quality and strength are above 60%.
3
Enter transponder frequency parameters:
ТП: 12226 MHz
|
Пол: V (Vertical)
|
Швидкість: 31400
|
FEC: 2/3
4
Start scan and save:
Press search button (usually OK or color button). Newly found channel will appear at the end of channel list.
Frequently Asked Questions
Yes, broadcasting is free-to-air (FTA). No paid subscription or Internet needed - just a DVB-S2 receiver and aligned satellite dish.
A DVB-S2 compatible receiver supporting MPEG-4 (H.264 / HEVC) is required. Older first-generation DVB-S/MPEG-2 receivers cannot receive the signal.
Check symbol rate (31400), dish alignment towards satellite Eutelsat 9B (9.0° E), and cable connections.
Currently the primary signal is FTA. During selective live sport events requiring rights protection, signal may be BISS encrypted - valid key is available on this page.