RG
Channel RTG Guinea Frequency on Satellite (Broadcast Parameters 2026)
Conax SDUp-to-date satellite broadcasting parameters of RTG Guinea in 2026: transponder frequency, polarization, and receiver tuning setup.
Broadcast Frequency
12303 MHz
Ku-діапазон
Polarization
H (Horizontal)
18 Volt
Symbol Rate (SR) / FEC
25546 kS/s
FEC: 7/8
Standard & Modulation
DVB-S / QPSK
MPEG-4
Latest TV channel broadcast parameters in 2026
The TV channel RTG Guinea broadcasts via the geostationary satellite Astra 4A (5.0° E) on transponder 12303 MHz with horizontal polarization (H). The digital symbol rate is 25546 kS/s, FEC error correction - 7/8. Broadcasting is provided in DVB-S / QPSK standard with MPEG-4 video compression and SD quality. Signal access is encrypted (Conax), available via pay-TV subscription.
Broadcast parameters of RTG Guinea
Transponder frequency and reception parameters (2026)
Satellite & Orbit
Astra 4A
(5.0° E)
Frequency & Polarization
12303 H
(Horizontal)
Symbol Rate (SR) / FEC
25546
•
FEC 7/8
Standard & Modulation
DVB-S / QPSK
Compression & Video Quality
MPEG-4
• SD
Access / Encryption
Conax
Provider / Package
StarSat
Audio Language
French
Transmission Mode
Digital
Update Date
25.10.2026
Tuning formula for receiver:
12303 H 25546 7/8 DVB-S
Stream PID Codes
For manual PID scanning
Service ID
7611
Video PID
559
Audio PID
fre
PCR PID
559
PMT PID
7611
Audio Language
fre
How to tune channel RTG Guinea on satellite receiver
Step-by-step manual frequency search guide in 2026
1
Open dish antenna setup menu:
On the remote control, press MENU and select «Installation» or «Channel Search».
2
Select satellite:
Select Astra 4A (5.0° E). Ensure signal quality and strength are above 60%.
3
Enter transponder frequency parameters:
ТП: 12303 MHz
|
Пол: H (Horizontal)
|
Швидкість: 25546
|
FEC: 7/8
4
Start scan and save:
Press search button (usually OK or color button). Newly found channel will appear at the end of channel list.
Frequently Asked Questions
Signal is encrypted. A smartcard or provider subscription is required for reception.
A DVB-S compatible receiver supporting MPEG-4 (H.264 / HEVC) is required. Older first-generation DVB-S/MPEG-2 receivers cannot receive the signal.
Check symbol rate (25546), dish alignment towards satellite Astra 4A (5.0° E), and cable connections.
Currently the primary signal is FTA. During selective live sport events requiring rights protection, signal may be BISS encrypted - valid key is available on this page.