MT
Channel Metro TV.. Frequency on Satellite (Broadcast Parameters 2026)
PowerVu SDUp-to-date satellite broadcasting parameters of Metro TV.. in 2026: transponder frequency, polarization, and receiver tuning setup.
Broadcast Frequency
12226 MHz
Ku-діапазон
Polarization
H (Horizontal)
18 Volt
Symbol Rate (SR) / FEC
27500 kS/s
FEC: 3/5
Standard & Modulation
DVB-S2 / QPSK
MPEG-4
Latest TV channel broadcast parameters in 2026
The TV channel Metro TV.. broadcasts via the geostationary satellite Astra 4A (5.0° E) on transponder 12226 MHz with horizontal polarization (H). The digital symbol rate is 27500 kS/s, FEC error correction - 3/5. Broadcasting is provided in DVB-S2 / QPSK standard with MPEG-4 video compression and SD quality. Signal access is encrypted (PowerVu), available via pay-TV subscription.
Broadcast parameters of Metro TV..
Transponder frequency and reception parameters (2026)
Satellite & Orbit
Astra 4A
(5.0° E)
Frequency & Polarization
12226 H
(Horizontal)
Symbol Rate (SR) / FEC
27500
•
FEC 3/5
Standard & Modulation
DVB-S2 / QPSK
Compression & Video Quality
MPEG-4
• SD
Access / Encryption
PowerVu
Provider / Package
MTN Worldwide TV
Audio Language
Original
Transmission Mode
Digital
Update Date
25.10.2026
Tuning formula for receiver:
12226 H 27500 3/5 DVB-S2
Stream PID Codes
For manual PID scanning
Service ID
146
Video PID
6161
Audio PID
000
PCR PID
6161
PMT PID
146
Audio Language
000
How to tune channel Metro TV.. on satellite receiver
Step-by-step manual frequency search guide in 2026
1
Open dish antenna setup menu:
On the remote control, press MENU and select «Installation» or «Channel Search».
2
Select satellite:
Select Astra 4A (5.0° E). Ensure signal quality and strength are above 60%.
3
Enter transponder frequency parameters:
ТП: 12226 MHz
|
Пол: H (Horizontal)
|
Швидкість: 27500
|
FEC: 3/5
4
Start scan and save:
Press search button (usually OK or color button). Newly found channel will appear at the end of channel list.
Frequently Asked Questions
Signal is encrypted. A smartcard or provider subscription is required for reception.
A DVB-S2 compatible receiver supporting MPEG-4 (H.264 / HEVC) is required. Older first-generation DVB-S/MPEG-2 receivers cannot receive the signal.
Check symbol rate (27500), dish alignment towards satellite Astra 4A (5.0° E), and cable connections.
Currently the primary signal is FTA. During selective live sport events requiring rights protection, signal may be BISS encrypted - valid key is available on this page.