BOL
Channel Bolt Frequency on Satellite (Broadcast Parameters 2026)
Verimatrix SDUp-to-date satellite broadcasting parameters of Bolt in 2026: transponder frequency, polarization, and receiver tuning setup.
Broadcast Frequency
11766 MHz
Ku-діапазон
Polarization
H (Horizontal)
18 Volt
Symbol Rate (SR) / FEC
30000 kS/s
FEC: 2/3
Standard & Modulation
DVB-S2 / 8PSK
MPEG-4
Latest TV channel broadcast parameters in 2026
The TV channel Bolt broadcasts via the geostationary satellite Astra 4A (5.0° E) on transponder 11766 MHz with horizontal polarization (H). The digital symbol rate is 30000 kS/s, FEC error correction - 2/3. Broadcasting is provided in DVB-S2 / 8PSK standard with MPEG-4 video compression and SD quality. Signal access is encrypted (Verimatrix ), available via pay-TV subscription.
Broadcast parameters of Bolt
Transponder frequency and reception parameters (2026)
Satellite & Orbit
Astra 4A
(5.0° E)
Frequency & Polarization
11766 H
(Horizontal)
Symbol Rate (SR) / FEC
30000
•
FEC 2/3
Standard & Modulation
DVB-S2 / 8PSK
Compression & Video Quality
MPEG-4
• SD
Access / Encryption
Verimatrix
Provider / Package
1plus1 Media
Audio Language
Ukrainian
Transmission Mode
Digital
Update Date
25.10.2026
Tuning formula for receiver:
11766 H 30000 2/3 DVB-S2
Stream PID Codes
For manual PID scanning
Service ID
6133
Video PID
1331
Audio PID
ukr,rus
PCR PID
1331
PMT PID
6133
Audio Language
ukr
How to tune channel Bolt on satellite receiver
Step-by-step manual frequency search guide in 2026
1
Open dish antenna setup menu:
On the remote control, press MENU and select «Installation» or «Channel Search».
2
Select satellite:
Select Astra 4A (5.0° E). Ensure signal quality and strength are above 60%.
3
Enter transponder frequency parameters:
ТП: 11766 MHz
|
Пол: H (Horizontal)
|
Швидкість: 30000
|
FEC: 2/3
4
Start scan and save:
Press search button (usually OK or color button). Newly found channel will appear at the end of channel list.
Frequently Asked Questions
Signal is encrypted. A smartcard or provider subscription is required for reception.
A DVB-S2 compatible receiver supporting MPEG-4 (H.264 / HEVC) is required. Older first-generation DVB-S/MPEG-2 receivers cannot receive the signal.
Check symbol rate (30000), dish alignment towards satellite Astra 4A (5.0° E), and cable connections.
Currently the primary signal is FTA. During selective live sport events requiring rights protection, signal may be BISS encrypted - valid key is available on this page.