S3
Channel SRF 3 Frequency on Satellite (Broadcast Parameters 2026)
FTA (Free-to-Air) RadioUp-to-date satellite broadcasting parameters of SRF 3 in 2026: transponder frequency, polarization, and receiver tuning setup.
Broadcast Frequency
11526 MHz
Ku-діапазон
Polarization
H (Horizontal)
18 Volt
Symbol Rate (SR) / FEC
29700 kS/s
FEC: 2/3
Standard & Modulation
DVB-S2 / 8PSK
MPEG-1
Latest TV channel broadcast parameters in 2026
The TV channel SRF 3 broadcasts via the geostationary satellite Eutelsat Hot Bird 13G (13.0° E) on transponder 11526 MHz with horizontal polarization (H). The digital symbol rate is 29700 kS/s, FEC error correction - 2/3. Broadcasting is provided in DVB-S2 / 8PSK standard with MPEG-1 video compression and Radio quality. Signal access is Free-to-Air (FTA), no subscription or smartcard required.
Broadcast parameters of SRF 3
Transponder frequency and reception parameters (2026)
Satellite & Orbit
Eutelsat Hot Bird 13G
(13.0° E)
Frequency & Polarization
11526 H
(Horizontal)
Symbol Rate (SR) / FEC
29700
•
FEC 2/3
Standard & Modulation
DVB-S2 / 8PSK
Compression & Video Quality
MPEG-1
• Radio
Access / Encryption
FTA (Free-to-Air)
Provider / Package
Kabelio AG
Audio Language
German
Transmission Mode
Digital
Update Date
25.10.2026
Tuning formula for receiver:
11526 H 29700 2/3 DVB-S2
Stream PID Codes
For manual PID scanning
Service ID
14023
Video PID
-
Audio PID
213ger
PCR PID
14023
PMT PID
14023
Audio Language
ger
How to tune channel SRF 3 on satellite receiver
Step-by-step manual frequency search guide in 2026
1
Open dish antenna setup menu:
On the remote control, press MENU and select «Installation» or «Channel Search».
2
Select satellite:
Select Eutelsat Hot Bird 13G (13.0° E). Ensure signal quality and strength are above 60%.
3
Enter transponder frequency parameters:
ТП: 11526 MHz
|
Пол: H (Horizontal)
|
Швидкість: 29700
|
FEC: 2/3
4
Start scan and save:
Press search button (usually OK or color button). Newly found channel will appear at the end of channel list.
Frequently Asked Questions
Yes, broadcasting is free-to-air (FTA). No paid subscription or Internet needed - just a DVB-S2 receiver and aligned satellite dish.
A DVB-S2 compatible receiver supporting MPEG-4 (H.264 / HEVC) is required. Older first-generation DVB-S/MPEG-2 receivers cannot receive the signal.
Check symbol rate (29700), dish alignment towards satellite Eutelsat Hot Bird 13G (13.0° E), and cable connections.
Currently the primary signal is FTA. During selective live sport events requiring rights protection, signal may be BISS encrypted - valid key is available on this page.