NTN
Channel NTN Frequency on Satellite (Broadcast Parameters 2026)
FTA (Free-to-Air) SDUp-to-date satellite broadcasting parameters of NTN in 2026: transponder frequency, polarization, and receiver tuning setup.
Broadcast Frequency
12226 MHz
Ku-діапазон
Polarization
V (Vertical)
13 Volt
Symbol Rate (SR) / FEC
30000 kS/s
FEC: 5/6
Standard & Modulation
DVB-S2 / 8PSK
MPEG-4
Latest TV channel broadcast parameters in 2026
The TV channel NTN broadcasts via the geostationary satellite Eutelsat 9B (9.0° E) on transponder 12226 MHz with vertical polarization (V). The digital symbol rate is 30000 kS/s, FEC error correction - 5/6. Broadcasting is provided in DVB-S2 / 8PSK standard with MPEG-4 video compression and SD quality. Signal access is Free-to-Air (FTA), no subscription or smartcard required.
Broadcast parameters of NTN
Transponder frequency and reception parameters (2026)
Satellite & Orbit
Eutelsat 9B
(9.0° E)
Frequency & Polarization
12226 V
(Vertical)
Symbol Rate (SR) / FEC
30000
•
FEC 5/6
Standard & Modulation
DVB-S2 / 8PSK
Compression & Video Quality
MPEG-4
• SD
Access / Encryption
FTA (Free-to-Air)
Provider / Package
ZeonBud
Audio Language
Ukrainian
Transmission Mode
Digital
Update Date
20.10.2026
Tuning formula for receiver:
12226 V 30000 5/6 DVB-S2
Stream PID Codes
For manual PID scanning
Service ID
25
Video PID
2501
Audio PID
2502ukr
PCR PID
2501
PMT PID
25
Audio Language
ukr
How to tune channel NTN on satellite receiver
Step-by-step manual frequency search guide in 2026
1
Open dish antenna setup menu:
On the remote control, press MENU and select «Installation» or «Channel Search».
2
Select satellite:
Select Eutelsat 9B (9.0° E). Ensure signal quality and strength are above 60%.
3
Enter transponder frequency parameters:
ТП: 12226 MHz
|
Пол: V (Vertical)
|
Швидкість: 30000
|
FEC: 5/6
4
Start scan and save:
Press search button (usually OK or color button). Newly found channel will appear at the end of channel list.
Frequently Asked Questions
Yes, broadcasting is free-to-air (FTA). No paid subscription or Internet needed - just a DVB-S2 receiver and aligned satellite dish.
A DVB-S2 compatible receiver supporting MPEG-4 (H.264 / HEVC) is required. Older first-generation DVB-S/MPEG-2 receivers cannot receive the signal.
Check symbol rate (30000), dish alignment towards satellite Eutelsat 9B (9.0° E), and cable connections.
Currently the primary signal is FTA. During selective live sport events requiring rights protection, signal may be BISS encrypted - valid key is available on this page.