V2
Channel Virtuali 2 Frequency on Satellite (Broadcast Parameters 2026)
PowerVu SDUp-to-date satellite broadcasting parameters of Virtuali 2 in 2026: transponder frequency, polarization, and receiver tuning setup.
Broadcast Frequency
12700 MHz
Ku-діапазон
Polarization
H (Horizontal)
18 Volt
Symbol Rate (SR) / FEC
9880 kS/s
FEC: 1/2
Standard & Modulation
DVB-S / QPSK
MPEG-2
Latest TV channel broadcast parameters in 2026
The TV channel Virtuali 2 broadcasts via the geostationary satellite Eutelsat 16A (16.0° E) on transponder 12700 MHz with horizontal polarization (H). The digital symbol rate is 9880 kS/s, FEC error correction - 1/2. Broadcasting is provided in DVB-S / QPSK standard with MPEG-2 video compression and SD quality. Signal access is encrypted (PowerVu), available via pay-TV subscription.
Broadcast parameters of Virtuali 2
Transponder frequency and reception parameters (2026)
Satellite & Orbit
Eutelsat 16A
(16.0° E)
Frequency & Polarization
12700 H
(Horizontal)
Symbol Rate (SR) / FEC
9880
•
FEC 1/2
Standard & Modulation
DVB-S / QPSK
Compression & Video Quality
MPEG-2
• SD
Access / Encryption
PowerVu
Provider / Package
Unire
Audio Language
Italian
Transmission Mode
Digital
Update Date
25.10.2026
Tuning formula for receiver:
12700 H 9880 1/2 DVB-S
Stream PID Codes
For manual PID scanning
Service ID
7
Video PID
710
Audio PID
700ita
PCR PID
710
PMT PID
7
Audio Language
ita
How to tune channel Virtuali 2 on satellite receiver
Step-by-step manual frequency search guide in 2026
1
Open dish antenna setup menu:
On the remote control, press MENU and select «Installation» or «Channel Search».
2
Select satellite:
Select Eutelsat 16A (16.0° E). Ensure signal quality and strength are above 60%.
3
Enter transponder frequency parameters:
ТП: 12700 MHz
|
Пол: H (Horizontal)
|
Швидкість: 9880
|
FEC: 1/2
4
Start scan and save:
Press search button (usually OK or color button). Newly found channel will appear at the end of channel list.
Frequently Asked Questions
Signal is encrypted. A smartcard or provider subscription is required for reception.
A DVB-S compatible receiver supporting MPEG-4 (H.264 / HEVC) is required. Older first-generation DVB-S/MPEG-2 receivers cannot receive the signal.
Check symbol rate (9880), dish alignment towards satellite Eutelsat 16A (16.0° E), and cable connections.
Currently the primary signal is FTA. During selective live sport events requiring rights protection, signal may be BISS encrypted - valid key is available on this page.