UB
Channel Unire Blu Frequency on Satellite (Broadcast Parameters 2026)
PowerVu SDUp-to-date satellite broadcasting parameters of Unire Blu in 2026: transponder frequency, polarization, and receiver tuning setup.
Broadcast Frequency
12724 MHz
Ku-діапазон
Polarization
H (Horizontal)
18 Volt
Symbol Rate (SR) / FEC
4100 kS/s
FEC: 3/4
Standard & Modulation
DVB-S / QPSK
MPEG-2
Latest TV channel broadcast parameters in 2026
The TV channel Unire Blu broadcasts via the geostationary satellite Eutelsat 16A (16.0° E) on transponder 12724 MHz with horizontal polarization (H). The digital symbol rate is 4100 kS/s, FEC error correction - 3/4. Broadcasting is provided in DVB-S / QPSK standard with MPEG-2 video compression and SD quality. Signal access is encrypted (PowerVu), available via pay-TV subscription.
Broadcast parameters of Unire Blu
Transponder frequency and reception parameters (2026)
Satellite & Orbit
Eutelsat 16A
(16.0° E)
Frequency & Polarization
12724 H
(Horizontal)
Symbol Rate (SR) / FEC
4100
•
FEC 3/4
Standard & Modulation
DVB-S / QPSK
Compression & Video Quality
MPEG-2
• SD
Access / Encryption
PowerVu
Provider / Package
Unire
Audio Language
Italian
Transmission Mode
Digital
Update Date
25.10.2026
Tuning formula for receiver:
12724 H 4100 3/4 DVB-S
Stream PID Codes
For manual PID scanning
Service ID
10
Video PID
310
Audio PID
300ita
PCR PID
310
PMT PID
10
Audio Language
ita
How to tune channel Unire Blu on satellite receiver
Step-by-step manual frequency search guide in 2026
1
Open dish antenna setup menu:
On the remote control, press MENU and select «Installation» or «Channel Search».
2
Select satellite:
Select Eutelsat 16A (16.0° E). Ensure signal quality and strength are above 60%.
3
Enter transponder frequency parameters:
ТП: 12724 MHz
|
Пол: H (Horizontal)
|
Швидкість: 4100
|
FEC: 3/4
4
Start scan and save:
Press search button (usually OK or color button). Newly found channel will appear at the end of channel list.
Frequently Asked Questions
Signal is encrypted. A smartcard or provider subscription is required for reception.
A DVB-S compatible receiver supporting MPEG-4 (H.264 / HEVC) is required. Older first-generation DVB-S/MPEG-2 receivers cannot receive the signal.
Check symbol rate (4100), dish alignment towards satellite Eutelsat 16A (16.0° E), and cable connections.
Currently the primary signal is FTA. During selective live sport events requiring rights protection, signal may be BISS encrypted - valid key is available on this page.