TVT
Channel TVT Frequency on Satellite (Broadcast Parameters 2026)
FTA (Free-to-Air) SDUp-to-date satellite broadcasting parameters of TVT in 2026: transponder frequency, polarization, and receiver tuning setup.
Broadcast Frequency
12562 MHz
Ku-діапазон
Polarization
H (Horizontal)
18 Volt
Symbol Rate (SR) / FEC
30000 kS/s
FEC: 2/3
Standard & Modulation
DVB-S2 / 8PSK
MPEG-2
Latest TV channel broadcast parameters in 2026
The TV channel TVT broadcasts via the geostationary satellite Eutelsat 16A (16.0° E) on transponder 12562 MHz with horizontal polarization (H). The digital symbol rate is 30000 kS/s, FEC error correction - 2/3. Broadcasting is provided in DVB-S2 / 8PSK standard with MPEG-2 video compression and SD quality. Signal access is Free-to-Air (FTA), no subscription or smartcard required.
Broadcast parameters of TVT
Transponder frequency and reception parameters (2026)
Satellite & Orbit
Eutelsat 16A
(16.0° E)
Frequency & Polarization
12562 H
(Horizontal)
Symbol Rate (SR) / FEC
30000
•
FEC 2/3
Standard & Modulation
DVB-S2 / 8PSK
Compression & Video Quality
MPEG-2
• SD
Access / Encryption
FTA (Free-to-Air)
Provider / Package
New World TV
Audio Language
French
Transmission Mode
Digital
Update Date
25.10.2026
Tuning formula for receiver:
12562 H 30000 2/3 DVB-S2
Stream PID Codes
For manual PID scanning
Service ID
206
Video PID
2061
Audio PID
2062fre
PCR PID
2061
PMT PID
206
Audio Language
fre
How to tune channel TVT on satellite receiver
Step-by-step manual frequency search guide in 2026
1
Open dish antenna setup menu:
On the remote control, press MENU and select «Installation» or «Channel Search».
2
Select satellite:
Select Eutelsat 16A (16.0° E). Ensure signal quality and strength are above 60%.
3
Enter transponder frequency parameters:
ТП: 12562 MHz
|
Пол: H (Horizontal)
|
Швидкість: 30000
|
FEC: 2/3
4
Start scan and save:
Press search button (usually OK or color button). Newly found channel will appear at the end of channel list.
Frequently Asked Questions
Yes, broadcasting is free-to-air (FTA). No paid subscription or Internet needed - just a DVB-S2 receiver and aligned satellite dish.
A DVB-S2 compatible receiver supporting MPEG-4 (H.264 / HEVC) is required. Older first-generation DVB-S/MPEG-2 receivers cannot receive the signal.
Check symbol rate (30000), dish alignment towards satellite Eutelsat 16A (16.0° E), and cable connections.
Currently the primary signal is FTA. During selective live sport events requiring rights protection, signal may be BISS encrypted - valid key is available on this page.