TL
Channel TV Lux Frequency on Satellite (Broadcast Parameters 2026)
Conax HDUp-to-date satellite broadcasting parameters of TV Lux in 2026: transponder frequency, polarization, and receiver tuning setup.
Broadcast Frequency
11092 MHz
Ku-діапазон
Polarization
V (Vertical)
13 Volt
Symbol Rate (SR) / FEC
27500 kS/s
FEC: 4/5
Standard & Modulation
DVB-S2 / 8PSK
MPEG-4
Latest TV channel broadcast parameters in 2026
The TV channel TV Lux broadcasts via the geostationary satellite Eutelsat 16A (16.0° E) on transponder 11092 MHz with vertical polarization (V). The digital symbol rate is 27500 kS/s, FEC error correction - 4/5. Broadcasting is provided in DVB-S2 / 8PSK standard with MPEG-4 video compression and HD quality. Signal access is encrypted (Conax), available via pay-TV subscription.
Broadcast parameters of TV Lux
Transponder frequency and reception parameters (2026)
Satellite & Orbit
Eutelsat 16A
(16.0° E)
Frequency & Polarization
11092 V
(Vertical)
Symbol Rate (SR) / FEC
27500
•
FEC 4/5
Standard & Modulation
DVB-S2 / 8PSK
Compression & Video Quality
MPEG-4
• HD
Access / Encryption
Conax
Provider / Package
AntikSat
Audio Language
Slovak
Transmission Mode
Digital
Update Date
25.10.2026
Tuning formula for receiver:
11092 V 27500 4/5 DVB-S2
Stream PID Codes
For manual PID scanning
Service ID
1202
Video PID
1201
Audio PID
slo
PCR PID
1201
PMT PID
1202
Audio Language
slo
How to tune channel TV Lux on satellite receiver
Step-by-step manual frequency search guide in 2026
1
Open dish antenna setup menu:
On the remote control, press MENU and select «Installation» or «Channel Search».
2
Select satellite:
Select Eutelsat 16A (16.0° E). Ensure signal quality and strength are above 60%.
3
Enter transponder frequency parameters:
ТП: 11092 MHz
|
Пол: V (Vertical)
|
Швидкість: 27500
|
FEC: 4/5
4
Start scan and save:
Press search button (usually OK or color button). Newly found channel will appear at the end of channel list.
Frequently Asked Questions
Signal is encrypted. A smartcard or provider subscription is required for reception.
A DVB-S2 compatible receiver supporting MPEG-4 (H.264 / HEVC) is required. Older first-generation DVB-S/MPEG-2 receivers cannot receive the signal.
Check symbol rate (27500), dish alignment towards satellite Eutelsat 16A (16.0° E), and cable connections.
Currently the primary signal is FTA. During selective live sport events requiring rights protection, signal may be BISS encrypted - valid key is available on this page.