RK
Channel RTS Kolo Frequency on Satellite (Broadcast Parameters 2026)
Videoguard, Irdeto SDUp-to-date satellite broadcasting parameters of RTS Kolo in 2026: transponder frequency, polarization, and receiver tuning setup.
Broadcast Frequency
11234 MHz
Ku-діапазон
Polarization
H (Horizontal)
18 Volt
Symbol Rate (SR) / FEC
7500 kS/s
FEC: 2/3
Standard & Modulation
DVB-S2 / QPSK
MPEG-4
Latest TV channel broadcast parameters in 2026
The TV channel RTS Kolo broadcasts via the geostationary satellite Eutelsat 16A (16.0° E) on transponder 11234 MHz with horizontal polarization (H). The digital symbol rate is 7500 kS/s, FEC error correction - 2/3. Broadcasting is provided in DVB-S2 / QPSK standard with MPEG-4 video compression and SD quality. Signal access is encrypted (Videoguard, Irdeto), available via pay-TV subscription.
Broadcast parameters of RTS Kolo
Transponder frequency and reception parameters (2026)
Satellite & Orbit
Eutelsat 16A
(16.0° E)
Frequency & Polarization
11234 H
(Horizontal)
Symbol Rate (SR) / FEC
7500
•
FEC 2/3
Standard & Modulation
DVB-S2 / QPSK
Compression & Video Quality
MPEG-4
• SD
Access / Encryption
Videoguard, Irdeto
Provider / Package
Telekom Srbija
Audio Language
Serbian
Transmission Mode
Digital
Update Date
25.10.2026
Tuning formula for receiver:
11234 H 7500 2/3 DVB-S2
Stream PID Codes
For manual PID scanning
Service ID
4402
Video PID
4021
Audio PID
4022srp
PCR PID
4021
PMT PID
4402
Audio Language
srp
How to tune channel RTS Kolo on satellite receiver
Step-by-step manual frequency search guide in 2026
1
Open dish antenna setup menu:
On the remote control, press MENU and select «Installation» or «Channel Search».
2
Select satellite:
Select Eutelsat 16A (16.0° E). Ensure signal quality and strength are above 60%.
3
Enter transponder frequency parameters:
ТП: 11234 MHz
|
Пол: H (Horizontal)
|
Швидкість: 7500
|
FEC: 2/3
4
Start scan and save:
Press search button (usually OK or color button). Newly found channel will appear at the end of channel list.
Frequently Asked Questions
Signal is encrypted. A smartcard or provider subscription is required for reception.
A DVB-S2 compatible receiver supporting MPEG-4 (H.264 / HEVC) is required. Older first-generation DVB-S/MPEG-2 receivers cannot receive the signal.
Check symbol rate (7500), dish alignment towards satellite Eutelsat 16A (16.0° E), and cable connections.
Currently the primary signal is FTA. During selective live sport events requiring rights protection, signal may be BISS encrypted - valid key is available on this page.