R1
Channel RTK 1 Frequency on Satellite (Broadcast Parameters 2026)
FTA (Free-to-Air) SDUp-to-date satellite broadcasting parameters of RTK 1 in 2026: transponder frequency, polarization, and receiver tuning setup.
Broadcast Frequency
10762 MHz
Ku-діапазон
Polarization
H (Horizontal)
18 Volt
Symbol Rate (SR) / FEC
30000 kS/s
FEC: 3/5
Standard & Modulation
DVB-S2 / 8PSK
MPEG-4
Latest TV channel broadcast parameters in 2026
The TV channel RTK 1 broadcasts via the geostationary satellite Eutelsat 16A (16.0° E) on transponder 10762 MHz with horizontal polarization (H). The digital symbol rate is 30000 kS/s, FEC error correction - 3/5. Broadcasting is provided in DVB-S2 / 8PSK standard with MPEG-4 video compression and SD quality. Signal access is Free-to-Air (FTA), no subscription or smartcard required.
Broadcast parameters of RTK 1
Transponder frequency and reception parameters (2026)
Satellite & Orbit
Eutelsat 16A
(16.0° E)
Frequency & Polarization
10762 H
(Horizontal)
Symbol Rate (SR) / FEC
30000
•
FEC 3/5
Standard & Modulation
DVB-S2 / 8PSK
Compression & Video Quality
MPEG-4
• SD
Access / Encryption
FTA (Free-to-Air)
Provider / Package
DigitAlb
Audio Language
Albanian
Transmission Mode
Digital
Update Date
25.10.2026
Tuning formula for receiver:
10762 H 30000 3/5 DVB-S2
Stream PID Codes
For manual PID scanning
Service ID
1000
Video PID
1001
Audio PID
1002alb
PCR PID
1001
PMT PID
1000
Audio Language
alb
How to tune channel RTK 1 on satellite receiver
Step-by-step manual frequency search guide in 2026
1
Open dish antenna setup menu:
On the remote control, press MENU and select «Installation» or «Channel Search».
2
Select satellite:
Select Eutelsat 16A (16.0° E). Ensure signal quality and strength are above 60%.
3
Enter transponder frequency parameters:
ТП: 10762 MHz
|
Пол: H (Horizontal)
|
Швидкість: 30000
|
FEC: 3/5
4
Start scan and save:
Press search button (usually OK or color button). Newly found channel will appear at the end of channel list.
Frequently Asked Questions
Yes, broadcasting is free-to-air (FTA). No paid subscription or Internet needed - just a DVB-S2 receiver and aligned satellite dish.
A DVB-S2 compatible receiver supporting MPEG-4 (H.264 / HEVC) is required. Older first-generation DVB-S/MPEG-2 receivers cannot receive the signal.
Check symbol rate (30000), dish alignment towards satellite Eutelsat 16A (16.0° E), and cable connections.
Currently the primary signal is FTA. During selective live sport events requiring rights protection, signal may be BISS encrypted - valid key is available on this page.