HT
Channel Herceg TV Frequency on Satellite (Broadcast Parameters 2026)
FTA (Free-to-Air) HDUp-to-date satellite broadcasting parameters of Herceg TV in 2026: transponder frequency, polarization, and receiver tuning setup.
Broadcast Frequency
11401 MHz
Ku-діапазон
Polarization
V (Vertical)
13 Volt
Symbol Rate (SR) / FEC
17500 kS/s
FEC: 3/4
Standard & Modulation
DVB-S2 / T2MI
MPEG-4
Latest TV channel broadcast parameters in 2026
The TV channel Herceg TV broadcasts via the geostationary satellite Eutelsat 16A (16.0° E) on transponder 11401 MHz with vertical polarization (V). The digital symbol rate is 17500 kS/s, FEC error correction - 3/4. Broadcasting is provided in DVB-S2 / T2MI standard with MPEG-4 video compression and HD quality. Signal access is Free-to-Air (FTA), no subscription or smartcard required.
Broadcast parameters of Herceg TV
Transponder frequency and reception parameters (2026)
Satellite & Orbit
Eutelsat 16A
(16.0° E)
Frequency & Polarization
11401 V
(Vertical)
Symbol Rate (SR) / FEC
17500
•
FEC 3/4
Standard & Modulation
DVB-S2 / T2MI
Compression & Video Quality
MPEG-4
• HD
Access / Encryption
FTA (Free-to-Air)
Provider / Package
Vidi TV
Audio Language
Bosnian
Transmission Mode
Digital
Update Date
25.10.2026
Tuning formula for receiver:
11401 V 17500 3/4 DVB-S2
Stream PID Codes
For manual PID scanning
Service ID
4015
Video PID
4225
Audio PID
4227bos
PCR PID
4225
PMT PID
4015
Audio Language
bos
How to tune channel Herceg TV on satellite receiver
Step-by-step manual frequency search guide in 2026
1
Open dish antenna setup menu:
On the remote control, press MENU and select «Installation» or «Channel Search».
2
Select satellite:
Select Eutelsat 16A (16.0° E). Ensure signal quality and strength are above 60%.
3
Enter transponder frequency parameters:
ТП: 11401 MHz
|
Пол: V (Vertical)
|
Швидкість: 17500
|
FEC: 3/4
4
Start scan and save:
Press search button (usually OK or color button). Newly found channel will appear at the end of channel list.
Frequently Asked Questions
Yes, broadcasting is free-to-air (FTA). No paid subscription or Internet needed - just a DVB-S2 receiver and aligned satellite dish.
A DVB-S2 compatible receiver supporting MPEG-4 (H.264 / HEVC) is required. Older first-generation DVB-S/MPEG-2 receivers cannot receive the signal.
Check symbol rate (17500), dish alignment towards satellite Eutelsat 16A (16.0° E), and cable connections.
Currently the primary signal is FTA. During selective live sport events requiring rights protection, signal may be BISS encrypted - valid key is available on this page.