C(
Channel CT:D (Decko) (06-20 CET) Frequency on Satellite (Broadcast Parameters 2026)
Conax, Irdeto SDUp-to-date satellite broadcasting parameters of CT:D (Decko) (06-20 CET) in 2026: transponder frequency, polarization, and receiver tuning setup.
Broadcast Frequency
11055 MHz
Ku-діапазон
Polarization
V (Vertical)
13 Volt
Symbol Rate (SR) / FEC
27500 kS/s
FEC: 4/5
Standard & Modulation
DVB-S2 / QPSK
HEVC (H.265)
Latest TV channel broadcast parameters in 2026
The TV channel CT:D (Decko) (06-20 CET) broadcasts via the geostationary satellite Eutelsat 16A (16.0° E) on transponder 11055 MHz with vertical polarization (V). The digital symbol rate is 27500 kS/s, FEC error correction - 4/5. Broadcasting is provided in DVB-S2 / QPSK standard with HEVC (H.265) video compression and SD quality. Signal access is encrypted (Conax, Irdeto), available via pay-TV subscription.
Broadcast parameters of CT:D (Decko) (06-20 CET)
Transponder frequency and reception parameters (2026)
Satellite & Orbit
Eutelsat 16A
(16.0° E)
Frequency & Polarization
11055 V
(Vertical)
Symbol Rate (SR) / FEC
27500
•
FEC 4/5
Standard & Modulation
DVB-S2 / QPSK
Compression & Video Quality
HEVC (H.265)
• SD
Access / Encryption
Conax, Irdeto
Provider / Package
AntikSat
Audio Language
Czech
Transmission Mode
Digital
Update Date
25.10.2026
Tuning formula for receiver:
11055 V 27500 4/5 DVB-S2
Stream PID Codes
For manual PID scanning
Service ID
1159
Video PID
1901
Audio PID
1902cze
PCR PID
1901
PMT PID
1159
Audio Language
cze
How to tune channel CT:D (Decko) (06-20 CET) on satellite receiver
Step-by-step manual frequency search guide in 2026
1
Open dish antenna setup menu:
On the remote control, press MENU and select «Installation» or «Channel Search».
2
Select satellite:
Select Eutelsat 16A (16.0° E). Ensure signal quality and strength are above 60%.
3
Enter transponder frequency parameters:
ТП: 11055 MHz
|
Пол: V (Vertical)
|
Швидкість: 27500
|
FEC: 4/5
4
Start scan and save:
Press search button (usually OK or color button). Newly found channel will appear at the end of channel list.
Frequently Asked Questions
Signal is encrypted. A smartcard or provider subscription is required for reception.
A DVB-S2 compatible receiver supporting MPEG-4 (H.264 / HEVC) is required. Older first-generation DVB-S/MPEG-2 receivers cannot receive the signal.
Check symbol rate (27500), dish alignment towards satellite Eutelsat 16A (16.0° E), and cable connections.
Currently the primary signal is FTA. During selective live sport events requiring rights protection, signal may be BISS encrypted - valid key is available on this page.