BB2
Channel BB24 Frequency on Satellite (Broadcast Parameters 2026)
FTA (Free-to-Air) SDUp-to-date satellite broadcasting parameters of BB24 in 2026: transponder frequency, polarization, and receiver tuning setup.
Broadcast Frequency
10804 MHz
Ku-діапазон
Polarization
H (Horizontal)
18 Volt
Symbol Rate (SR) / FEC
30000 kS/s
FEC: None
Standard & Modulation
DVB-S2 / QPSK
MPEG-4
Latest TV channel broadcast parameters in 2026
The TV channel BB24 broadcasts via the geostationary satellite Eutelsat 16A (16.0° E) on transponder 10804 MHz with horizontal polarization (H). The digital symbol rate is 30000 kS/s, FEC error correction - None. Broadcasting is provided in DVB-S2 / QPSK standard with MPEG-4 video compression and SD quality. Signal access is Free-to-Air (FTA), no subscription or smartcard required.
Broadcast parameters of BB24
Transponder frequency and reception parameters (2026)
Satellite & Orbit
Eutelsat 16A
(16.0° E)
Frequency & Polarization
10804 H
(Horizontal)
Symbol Rate (SR) / FEC
30000
•
FEC None
Standard & Modulation
DVB-S2 / QPSK
Compression & Video Quality
MPEG-4
• SD
Access / Encryption
FTA (Free-to-Air)
Provider / Package
Eutelsat
Audio Language
French
Transmission Mode
Digital
Update Date
25.10.2026
Tuning formula for receiver:
10804 H 30000 None DVB-S2
Stream PID Codes
For manual PID scanning
Service ID
202
Video PID
2021
Audio PID
2022fre
PCR PID
2021
PMT PID
202
Audio Language
fre
How to tune channel BB24 on satellite receiver
Step-by-step manual frequency search guide in 2026
1
Open dish antenna setup menu:
On the remote control, press MENU and select «Installation» or «Channel Search».
2
Select satellite:
Select Eutelsat 16A (16.0° E). Ensure signal quality and strength are above 60%.
3
Enter transponder frequency parameters:
ТП: 10804 MHz
|
Пол: H (Horizontal)
|
Швидкість: 30000
|
FEC: None
4
Start scan and save:
Press search button (usually OK or color button). Newly found channel will appear at the end of channel list.
Frequently Asked Questions
Yes, broadcasting is free-to-air (FTA). No paid subscription or Internet needed - just a DVB-S2 receiver and aligned satellite dish.
A DVB-S2 compatible receiver supporting MPEG-4 (H.264 / HEVC) is required. Older first-generation DVB-S/MPEG-2 receivers cannot receive the signal.
Check symbol rate (30000), dish alignment towards satellite Eutelsat 16A (16.0° E), and cable connections.
Currently the primary signal is FTA. During selective live sport events requiring rights protection, signal may be BISS encrypted - valid key is available on this page.