RAD
Channel RADA Frequency on Satellite (Broadcast Parameters 2026)
BISS Encrypted SDUp-to-date satellite broadcasting parameters of RADA in 2026: transponder frequency, polarization, and receiver tuning setup.
Broadcast Frequency
12073 MHz
Ku-діапазон
Polarization
H (Horizontal)
18 Volt
Symbol Rate (SR) / FEC
30000 kS/s
FEC: 2/3
Standard & Modulation
DVB-S2 / 8PSK
MPEG-4
Latest TV channel broadcast parameters in 2026
The TV channel RADA broadcasts via the geostationary satellite Astra 4A (5.0° E) on transponder 12073 MHz with horizontal polarization (H). The digital symbol rate is 30000 kS/s, FEC error correction - 2/3. Broadcasting is provided in DVB-S2 / 8PSK standard with MPEG-4 video compression and SD quality. Signal access is BISS encrypted, active key required for viewing.
Broadcast parameters of RADA
Transponder frequency and reception parameters (2026)
Satellite & Orbit
Astra 4A
(5.0° E)
Frequency & Polarization
12073 H
(Horizontal)
Symbol Rate (SR) / FEC
30000
•
FEC 2/3
Standard & Modulation
DVB-S2 / 8PSK
Compression & Video Quality
MPEG-4
• SD
Access / Encryption
BISS Encrypted
Provider / Package
StarLightMedia
Audio Language
Ukrainian
Resolution
720 × 576
Transmission Mode
Digital
Update Date
25.10.2026
Tuning formula for receiver:
12073 H 30000 2/3 DVB-S2
Stream PID Codes
For manual PID scanning
Service ID
2
Video PID
122
Audio PID
123ukr
PCR PID
122
PMT PID
2
Audio Language
ukr
How to tune channel RADA on satellite receiver
Step-by-step manual frequency search guide in 2026
1
Open dish antenna setup menu:
On the remote control, press MENU and select «Installation» or «Channel Search».
2
Select satellite:
Select Astra 4A (5.0° E). Ensure signal quality and strength are above 60%.
3
Enter transponder frequency parameters:
ТП: 12073 MHz
|
Пол: H (Horizontal)
|
Швидкість: 30000
|
FEC: 2/3
4
Start scan and save:
Press search button (usually OK or color button). Newly found channel will appear at the end of channel list.
Frequently Asked Questions
Signal is encrypted. A smartcard or provider subscription is required for reception.
A DVB-S2 compatible receiver supporting MPEG-4 (H.264 / HEVC) is required. Older first-generation DVB-S/MPEG-2 receivers cannot receive the signal.
Check symbol rate (30000), dish alignment towards satellite Astra 4A (5.0° E), and cable connections.
Currently the primary signal is FTA. During selective live sport events requiring rights protection, signal may be BISS encrypted - valid key is available on this page.